GSMGravity: 2012

Friday, December 14, 2012

ot-903D dual sim.. lock sa sun.....one

share lang...

ot-903d lock sa sun..
unlock by lgtool remote service.

input imei & prd..
w8 until requst is done..

put none accepted sim,
at ilagay ang code..
and your done.

R3850 Cannot Open Message... Done in a trick :D

History : ayaw mag format sa gpgdrafon pati sa volcano... ayaw mag phone reset...
sa kalikotan ng kamay,namatay ang unit! :-O

Action Taken :

Re-Flash the phone...

DONE! at nakaka open na ng messages

Lesson : Always BackUp the flashfile before kalikot

F11 Cherry Mobile Power-On password... Done!

Action Taken : Dis-Assemble the Unit and look for the pinout RX-TX & GND

Quote:

Note : Change the Pinout Type "USB D+/D- to COM(RX/TX)"

DONE!

n100 insert sim done!!!!

good day po mga master..

may share po ako...

n100 insert sim..

ito po ang unit...
[IMG]

[/IMG]
kaya ito po ang ginawa ko chick lahat nang line nang sim... kaya ito po yung putol na line.. kaya jumper agad...
[IMG]

[/IMG]
pagkatapus ko mag jumper on ko ka agad...
[IMG]

[/IMG]
succesful ang simpling trick ko...
sana makatulong po ....

Saturday, December 1, 2012

Resetting Your Pocket PC Phone

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

To perform a soft reset

• Use the stylus to lightly press and hold the RESET button onthe bottom of your device. Your device restarts and displays the Today screen.

To perform a hard reset

Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device.

Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

2690 SHORTED, WATER DAMAGE,NO POWER!DONE SA MAHABANG HARDWARE!!!view me.....

share ko lg to mga bro: nokia 2690 shorted,water damage,no power:
[IMG]

[/IMG]
ito po ang short niya:
[IMG]

[/IMG]
kaya binuksan ko na at ito ang corruded components:

1st step: babad ky magic thinner:but still no luck,shorted pa rin,,
i check here,may mga capacitor din na corruded kaya pinalitan ko na,at reball ko na rin ang betty ic
[IMG]

[/IMG]
after re betty ic,ayun nawala na ang short,kaya check ulit sa mxkey,but still no luck,,kaya rehot ko na ang patong ic at inalog,,,at testing ulit bus check,,,no luck parin,so i decided to pull out and reball patong ic
[IMG]